In heavy industries such as power, firefighting, mining, and rock Climbing, working at heights is an unavoidable process. Working at 

heights refers  to a series of production or sports activities performed in environments more than 5 meters above the ground, safety 

mats, or safety nets. Personnel safety is paramount, and Safety Harness for working at heights are worn on the body to cope with 

these situations. Safety harnesses consist of webbing and safety harness hardware. The harness d ring is located at the back and is 

used to connect to the fall arrestor, providing a fixed connection point. In the event of a fall, the safety harness hardware also provides 

excellent cushioning, dispersing the impact force in multiple directions to minimize it. So, what are the requirements for Safety Harness 

Manufacturing Process?

1. The Safety Harness Manufacturing Process must be made of high-strength polyester webbing or even higher-strength fiber material.

2. The surface of safety harness hardware should be smooth, free of pits and cracks, and the tensile strength should meet the 

requirements of EN362 or ANSI Z359.

3. In addition, and very importantly, the Safety Harness Manufacturing Process must undergo a 48-hour salt spray test.

In addition to safety considerations, Safety Harness Manufacturing must also take into account the comfort of workers at heights.